Bucket elevator product advantages 1, drive power is small, the use of inflow feeding, induction discharge, large capacity hopper intensive layout. In material lifting, almost no return and excavation phenomenon, therefore, less power. 2, a wide range of lifting, this type of hoist on the type of materials, characteristics of the requirements of less, not only can enhance the general powder, small granular materials, but also to enhance the grinding of larger materials. Good sealing, less environmental pollution. 3 、 good operation reliability, advanced design principle and processing method ensure the reliability of the whole machine, and the trouble free time is more than 20 thousand hours. The lifting height is high. The hoist runs smoothly, so it can achieve a higher lifting height. 4. The service life is long, the feeding of the hoist adopts the inflow type, and the bucket is not needed to dig the material. There is little extrusion and collision between the materials. This machine in the design to ensure the materials in the feeding and unloading is less scattered, reduces the mechanical wear. Bucket elevator working principle The hopper scoop up the material from the storage below, lifting it along the conveyor belt or chain to the top, bypassing the top wheel and turning it down, and the bucket elevator empties the material into the receiving tank. The belt of a bucket elevator with a belt conveyor is usually made of rubber belts, mounted on or below the drive drum and on the up and down rollers. A chain driven bucket elevator is usually equipped with two parallel transmission chains, with or without a pair of drive sprockets on or below, and a pair of modified sprockets on or below. Bucket elevator generally equipped with shell, in order to prevent bucket lifting machine dust flying.