Specification |
Teeth Roll Diameter (mm) |
Teeth Roll Length(mm) |
Teeth Roll Qty. Teeth×Row
|
Teeth Speed (r/min) |
Feeding Size (mm) |
PGC-S1118 |
1100 |
1860 |
3×6 |
5.79 |
1500×1000×250 |
PGC-S1625 |
1600 |
2560 |
4×7 |
5.9 |
2500×1000×350 |
PGC-S1629 |
1630 |
2990 |
3×9 |
||
PGC-S2037 |
2000 |
3740 |
3×12 |
7.8 |
- |
PGC-S2451 |
2400 |
5130 |
3×16 |
7.4 |
- |
Specification |
Feeding Size(mm) |
Capacity (t/h)
|
Main Motor |
|||
Model |
Power(kW) |
Speed(r/min) |
Voltage(V) |
|||
PGC-S1118 |
≤150 |
140 |
Y225M-8 |
22 |
740 |
380 |
PGC-S1625 |
<240 |
520 |
- |
55 |
730 |
380 |
PGC-S1629 |
<160 |
460 |
- |
40 |
||
PGC-S2037 |
<150 |
565 |
Y315M3-8 |
110 |
735 |
380 |
PGC-S2451 |
<150 |
1150 |
- |
150 |
730 |
380 |
Specification |
Roll |
Grid Plate |
Coupling |
Bearing |
Bearing Chassis |
Cover |
Guide Slot |
PGC-S1118 |
4010 |
6680 |
23 |
- |
- |
995 |
- |
PGC-S1625 |
10700 |
9860 |
720 |
411 |
228 |
2020 |
- |
PGC-S1629 |
9477 |
11680 |
723 |
413 |
1100 |
1899 |
- |
PGC-S2037 |
33860 |
19240 |
255 |
1970 |
4435 |
71465 |
12630 |
PGC-S2451 |
- |
- |
107.3 |
- |
4846 |
29820 |
19477 |
Specification |
Supporting Trolley |
Trolley Mobile Winch |
Mainshaft |
Gearbox |
Max Parts(Spare Parts) |
Total Weight |
PGC-S1118 |
- |
- |
1270 |
1400 |
4010 |
15700 |
PGC-S1625 |
- |
- |
2720 |
5740 |
10700 |
33490 |
PGC-S1629 |
- |
- |
2780 |
5720 |
9477 |
33830 |
PGC-S2037 |
5880 |
7892 |
18760 |
5430 |
25335 |
132170 |
PGC-S2451 |
9214 |
6295 |
- |
- |
15200 |
83813 |
Advantages and application scope
(1) crushing force to a rigid force, sports a check point determined by the size and the nature of the broken material force, is variable, and thus, wearing parts wear little impact on discharging granularity. More importantly, when iron and hard to break into the machine, will not cause damage to the machine, if the size is not very big, need not stop, difficult pieces with the machine running automatically closed.
(2) with can adjust the size of the inertia force, make the equipment adequate for material crushing, crushing force and basic does not improve the material and parts of tangential velocity, which is especially suitable for the cement clinker, gold ore grinding cut sex more than strong and hard materials such as broken.
(3) the machine to work in the resonance point, installed power is only equivalent yield 1/2 ~ 1/5, other models can significantly reduce the operation cost.
Range of application
Widely used in iron and steel, metallurgy, mining and other industries is suitable for crushing medium hard coarse material, usually used for sintering machine landed the hot sinter cake, make the hot sinter cake break into suitable granularity cooling requirements.
Website:www.zcengineering.com
Phone:+0086-15801340546
E-mail:effie@zcengineering.com
lfqh12604@126.com
chenlifen12604@hotmail.com