GGT type series fully enclosed high roller environmental protection belt conveyor is the company on the basis of digesting and absorbing foreign advanced technology, developed a kind of high efficiency of belt conveyor.The fully enclosed operation environmentally friendly products, large conveying capacity, low maintenance cost advantages, is widely used in large ports, such as grain powder conveying occasions.

High rollers closed belt conveyor technology parameter table High roller enclosed type adhesive tape conveyer technology parameter list
Machine type Model	Unit to Unit	Tape Speed Speed (m/s)
		1.6	2	2.5	3.15	3.6
		Transmission capacity Conveying capacity
GGT500	m3/h	162	202	253	319	361
	t/h	122	152	190	239	271
GGT650	m3/h	226	282	430	556	628
	t/h	170	212	323	417	471
GGT800	m3/h	360	450	550	710	802
	t/h	270	338	413	533	602
GGT1000	m3/h	760	961	1200	1515	1710
	t/h	570	721	900	1138	1283
GGT1200	m3/h	975	1218	1522	1919	2166
	t/h	731	914	1142	1439	1625
GGT1400	m3/h	1186	1508	1855	2335	2639
	t/h	890	1131	1391	1751	1979
GGT1600	m3/h	1630	2077	2556	3220	3635
	t/h	1223	1558	1917	2415	2726
GGT1800	m3/h	1800	2380	2900	3600	4160
	t/h	1350	1785	2175	2700	3120
GGT2000	m3/h	-	3470	4338	5466	6247
	t/h	-	2603	3254	4100	4685
GGT2200	m3/h	-	-	-	6843	7821
	t/h	-	-	-	5132	5865
GGT1800	m3/h	-	-	-	8289	9473
	t/h	-	-	-	6217	7105

Note: the material calculated on wheat, bulk density, g = 0.75 t/m3, please choose according to the specific material selection.

High rollers closed belt conveyor technical parameters:

Parameter the Parameter machine type Model		GGT500	GGT650	GGT800	GGT1000	GGT1200	GGT1400	GGT1600	GGT1800	GGT2000	GGT2200	GGT2400
A	Conveyor Belt DuDu Belt width (mm)	500	650	800	1000	1200	1400	1600	1800	2000	2200	2400
B	Machine groove width Trough width (mm)	550	700	850	1050	1250	1450	1650	1850	2050	2250	2450
C	Machine groove outside Outer wide width (mm)	650	800	900	1150	1350	1550	1750	1950	2150	2350	2550
D	Machine slot height Trough height (mm)	583		708
E	Into the Length of feeder hopper hopper Length (mm)	625
F	Into the hopper level Feeder hopper height (mm)	500							625
G	The Tail length of the Tail lenght (mm)	560							750
H	Head length, Head lenght (mm)	300							500
J	Length of Discharge outlet Discharge outer length (mm)	700							1000